Configuring System Settings; General System Setup; Figure 9-1 General System Configuration; Table 9-1 General System Configurations - Honeywell HED2PER3 Configuration Manual

Performance Series IP Camera Software Configuration Guide

9 Configuring System Settings

This chapter contains the following sections:
•
General System Setup, page 66
•
Account Setup, page 67
•
Security, page 71
•
Restoring Default Settings, page 72
•
Import/Export, page 72
•
Automatic Maintenance, page 73
•
Upgrade, page 73

General System Setup

Go to Setup System Setup General.
The general interface includes the local host setup (including the camera name and GUI
language) and the date/time setup.
General

Figure 9-1 General System Configuration

Table 9-1 General System Configurations

Parameter
Device Name
Language
Video Standard
Max Log
Quantity
66
Function
Enter the camera's name.
Select a language from the drop-down list.
Select the video standard: NTSC or PAL. Note: If you modified
PAL/NTSC on the HRHT client, the modifications will not be
synchronized to the IPC web client.
Select a value between 1 to 1024. The default is 1024.