Configuring Network Event Settings; Figure 7-12 Sd Card Error Warning Configuration Interface; Figure 7-13 Capacity Warning; Table 7-4 Sd Card Configurations - Honeywell HED2PER3 Configuration Manual

Figure 7-12 SD Card Error Warning Configuration Interface

Figure 7-13 Capacity Warning

Table 7-4 SD Card Configurations

Parameter Function
Event
Select an event type in the dropdown list.
Type
Enable Check to enable the selected event type
Send
When enabled, the system sends an email alert when the event occurs.
Email
Capacity Enter a value between 0-99. If the capacity of SD card exceeds the set value,
Limit it will send a warning.
Emails cannot be sent if the network is offline or if there is an IP
Note
conflict.

Configuring Network Event Settings

Go to Setup Video Analytics Event Network.
Configuring Video Analytics
57