List Of Symbols - Honeywell HED2PER3 Configuration Manual

Performance series ip cameras
Hide thumbs Also See for HED2PER3:
Table of Contents

Advertisement

Appendix

List of Symbols

The following is a list of symbols that may appear on the camera:
Symbol
Explanation
The WEEE symbol.
This symbol indicates that when the end-user wishes to discard this product, it
must be sent to separate collection facilities for recovery and recycling. By
separating this product from other household-type waste, the volume of waste
sent to incinerators or landfills will be reduced, and thus natural resources will be
conserved.
The UL compliance logo.
This logo indicates that the product has been tested and is listed by UL (formerly
Underwriters Laboratories).
The FCC compliance logo.
This logo indicates that the product conforms to Federal Communications
Commission compliance standards.
The direct current symbol.
This symbol indicates that the power input/output for the product is direct current.
The alternating current symbol.
This symbol indicates that the power input/output for the product is alternating
current.
The RCM compliance logo.
This logo indicates that the product conforms with Australian RCM guidelines.
The CE compliance logo.
This logo indicates that the product conforms to the relevant guidelines/standards
for the European Union harmonization legislation.
The caution symbol.
This symbol indicates important information.
The protective earth (ground) symbol.
This symbol indicates that the marked terminal is intended for connection to the
protective earth/grounding conductor.
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents