Configuring Storage Settings; Configuring Schedule Settings; Configuring Record Schedule; Configuring Snapshot Schedule - Honeywell HED2PER3 Configuration Manual

Performance Series IP Camera Software Configuration Guide

8 Configuring Storage Settings

This chapter contains the following sections:
• Configuring Schedule Settings, page 60
• Configuring Destination Settings, page 61
• Configuring Recording Control, page 64

Configuring Schedule Settings

Configuring Record Schedule

Go to Setup Storage Setup Schedule  Record Schedule.
You can add or remove schedules for recording. There are three recording modes: General
(auto), Motion, and Alarm. You can configure up to nine recording periods per day.

Figure 8-1 Record Schedule

Record Schedule Color Codes:
•
Green: General recording
•
Yellow: Motion detection recording
•
Red: Alarm recording

Configuring Snapshot Schedule

Follow the same procedure to configure the settings on the Record Schedule tab.
60