Ftp; Nas; Figure 8-5 Ftp; Table 8-2 Ftp Configurations - Honeywell HED2PER3 Configuration Manual

If you want to erase all the data on the microSD card, click Format. A confirmation message
appears. Click OK to continue. The card is formatted and the camera reboots.

FTP

On the FTP tab, you can enable the FTP storage function. When enabled, event-triggered
video and snapshots (either scheduled or motion detection, depending on what you chose in
Figure 8-3) will be saved to the specified FTP server.

Figure 8-5 FTP

Table 8-2 FTP Configurations

Parameter
Enable
Server Address
Port
User Name
Password
Remote Directory
Panic Save
(Local)

NAS

On the NAS tab, you can enable network attached storage and configure storage settings.
Function
Select SFTP (Recommended) or FTP.
Enter the IP address of the FTP server.
The default setting is 21. You can modify this setting as
necessary.
Enter the server user name.
Enter the server password.
Create a name for the directory where recorded video and
snapshots will be stored.
Enable Panic Save (Local) to save to the local microSD card when
the network connection to FTP is unavailable.
Note This function is not supported by the following models:
HPW2P1/HBW2PER1.
Configuring Storage Settings
63