Ultra HD IP Camera User Guide
8. Configuring System Settings
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
Configuring General System Settings
You can configure the device name, user interface language, video standard, analog output,
and status LED settings on the Setup > System Setup > General page.
To change the device name, in the Device Name field, enter a new name, and then click Save.
To change the interface language, select a language from the Language list, and then click Save.
To change the video standard, select NTSC or PAL from the Video Standard list, and then click
Save.
To change the analog output, select ON or OFF from the Analog Output list, and then click Save.
To change the Max Log Quantity, enter a value between 1 and 1024, and then click Save.
60
Configuring General System Settings, page 60
Configuring Date and Time Settings, page 61
Configuring Account Settings, page 63
Resetting the Camera, page 68
Backing Up/Restoring a Configuration, page 68
Configuring Maintenance Settings, page 69
Upgrading the Firmware, page 69
Viewing Version Information, page 69
Managing Logs, page 70
Viewing Online Users, page 72