Configuring System Settings; Configuring System General Settings; Figure 8-1 Configuring System General Settings - Honeywell 30 Series Configuration Manual

Performance Series IP Camera Software Configuration Guide

8 Configuring System Settings

This chapter contains the following sections:
•

Configuring System General Settings,

•
Configuring Maintenance
•
Configuring User Accounts
•
Configuring Access List
Configuring System General Settings
Go to Setup System Setup General Settings.
This section explains how to configure the basic settings for the camera, such as the host
name and system time.

Figure 8-1 Configuring System General Settings

Host Name: Enter a name for the camera. The text will be displayed at the top of the main
page.
Turn off the LED indicators: If you do not want others to notice the network camera is in
operation, you can select this option to turn off the LED indicators.
Time zone: Select the appropriate time zone from the dropdown list. If you want to upload
Daylight Savings Time rules, see
80
page 80
Settings, page 81
Settings, page 86
Settings, page 87
Configuring Maintenance Settings on page 81 .