Configuring System Settings
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
Configuring General System Settings
You can configure the device name, user interface language, video standard, analog output,
and status LED settings on the Setup > System Setup > General page.
To change the device name, in the Device Name field, enter a new name, and then click Save.
To change the interface language, select a language from the Language list, and then click Save.
To change the video standard, select NTSC or PAL from the Video Standard list, and then click
Save.
To change the Max Log Quantity, enter a value between 1 and 1024, and then click Save.
Configuring General System Settings, page 85
Configuring Date and Time Settings, page 86
Configuring Account Settings, page 87
Resetting the Camera, page 92
Resetting the Camera, page 92
Backing Up/Restoring a Configuration, page 92
Configuring Maintenance Settings, page 93
Upgrading the Firmware, page 93
Viewing Version Information, page 94
Managing Logs, page 94
Viewing Online Users, page 96
9
9
800-22456 - A - 04/2017