Zoom And Focus; Figure 5-3 Motorized Zoom And Focus; Table 5-2 Zoom And Focus - Honeywell Performance HED1PR3 Software Configuration Manual

52 | Performance Series IP Camera Software Configuration Guide

Zoom and Focus

Parameter
Zoom
Focus
Auto Focus
Restore All
Refresh
www.honeywell.com/security
Note This section only applies to HBD3PR2 and H4D3PRV2 motorized focus/zoom
cameras.
Figure 5-3 Motorized Zoom and Focus
Table 5-2 Zoom and Focus
Function
Adjust the focal length of the lens by clicking "+" to zoom in or "–" to
zoom out. Changing the Speed setting adjusts the length of a
single-click increment.
Note After adjusting zoom, the lens will focus automatically.
Adjust the definition of the image by clicking "+" to focus far or "–" to
focus near. Changing the Speed setting adjusts the length of a
single-click increment.
Click to adjust the focus automatically.
Click to reset the lens to 0 position.
Note Reset the lens periodically if you are making a lot of zoom and
focus adjustments.
Refreshes the video image that is displayed.