Zoom And Focus Adjustment - Honeywell HD262H User Manual

22

Zoom and Focus Adjustment

Make zoom and focus adjustments:
View the camera image using the connected monitor.
1.
Loosen the zoom lever and move the screw between T
2.
(Tele) and W (Wide) to obtain the appropriate angle of view.
Tighten the zoom lock screw.
3.
Loosen the focus lever and move the screw between F (Far)
4.
and N (Near) to obtain the optimum focus.
Tighten the focus lock screw.
5.
Carefully remove the protection film after the installation is
complete. Leaving the film on the bubble during installation will
protect it from scratches during the installation process.
HD262H(X) Minidome Camera User Guide
Figure 1-13 Lens Adjustment
800-18622 – A – 07/2014