Configuring Picture Overlays; Configuring Regions Of Interest; Configuring Zoom And Focus Settings - Honeywell equIP Series User Manual

Configuring Picture Overlays

You can configure picture overlays on the
Setup  Compression Setup  Overlay
 Picture Overlay page.
To display a picture overlay, click Enable,
click Upload Picture, upload the picture,
and then click Save. The file must be in
BMP format, less than 16 KB, and no
more than 128×128 pixels.
To move the picture overlay, drag the
yellow frame to the desired location in
the preview window, and then click Save.
To hide the picture overlay, click Disable,
and then click Save.

Configuring Regions of Interest

You can configure regions of interest (ROI) on the Setup Compression Setup  ROI page.
To enable the ROI function, click Enable.
In the preview window, drag your mouse over the portion of the scene that you want to
designate as a region of interest, select an Image Quality level between 1 (lowest) and 6
(highest), and then click Save. You can add up to 4 regions of interest.
To delete a single region of interest, select it, and then click Delete. To delete all regions of
interest, click Remove All.

Configuring Zoom and Focus Settings

You can configure zoom and focus on the Setup  Zoom and Focus  Zoom and Focus page.
Configuring Video and Audio Settings
23