Step A3: Enter The Routing Configuration - Solid State Logic C10 HD Installation Manual

A: IO Configuration
S A3: e
tep nteR the
On systems with a redundant core, note that whenever system settings are changed, a flashing Press to Synchronise
icon will appear in the bottom right-hand corner of the screen. You do not need to synchronise the redundant system
until you have completed all of your configuration and are ready to exit the Maintenance pages.
‰ Press the menU (
Touchscreen:
Project Information Strip
‰ Press the StUdio (
User Toolbox
‰ Touch the RoUte (
Maintenance Menus
Page 4-8 | Section 4: Configuration
R
oUtinG conFiGURAtion pAGeS
) button towards the right-hand end of the Project Information Strip at the base of the
) button, located towards the right-hand end of the User Toolbox which appears:
) button which now appears at the bottom of the screen.
.
C10 HD Installation Guide