Step B7: Name Busses, Softkeys And Layers - Solid State Logic C10 HD Installation Manual

o o e
B: Console Configuration
S B7: n
tep Ame
R
The 8-character bottom half of the scribble strip above each fader is used to display a specific channel/fader name.
Channels and busses, as well as softkey banks, can be named in the Bus names display.
1 PGM 2
Note that ASG, Programme, Mix-Minus and Aux busses may also be named via their individual Touchscreen parameter
R
displays.
‰ Open the User Toolbox at the bottom of the Touchscreen by pressing the menU (
the right-hand end of the Project Information Strip, and select the nAmeS (
of the User Toolbox:
User Toolbox
The Bus names display will appear in the lower left of the Touchscreen:
S
F O
The left hand list shows the categories of items that can be named; the right hand list shows the elements within each
category.
‰ In the left hand list, touch the bus type for the bus to be named; the right hand list will flip to show
M MASTER M M A A S T T E E E R R M
the current names of all busses of that type. The MASTER Scroller can be used as an alternative
method of navigating the lists.
‰ Select the bus you want to rename (it will be outlined in red).
Master Scroller
‰ If the bus already has a name, press Rename to open an on-screen QWERTY keyboard. If the
bus has no name, the keyboard will appear automatically.
‰ Enter a new name via either the on-screen keyboard which appears (or on the external keyboard) and hit OK.
‰ When renaming multiple busses in a category, select the Auto increment box in the bottom left-hand corner.
Pressing ok will now cause the QWERTY keyboard to move to the next bus in the list, instead of closing. This enables
you to rapidly name one element after another without having to call up the QWERTY keyboard each time.
M M
N N
Page 4-30 | Section 4: Configuration
G
B , S
USSeS oFtkeyS And
I T Y
O
P
R
O
1
M M
L
l
AyeRS
) button which appears near the centre
) button located towards
C10 HD Installation Guide