A: Io Configuration; A: I/O C Onfiguration; Step A1: Check Connections; Step A2: Startup Console And Login - Solid State Logic C10 HD Installation Manual

A: io c
onFiGURAtion
S A1: c
tep heck
Ensure that the system is connected and powered according to the Installation section and any additional facility-specific
interconnection drawings.
S A2: S
tep tARtUp
‰ Power up the console.
Once the console has fully booted, log in as Administrator:
‰ Touch the padlock button towards the bottom right-hand corner of the Touchscreen:
Project Information Strip
This will activate the login display:
‰ Touch Administrator, enter the Administrator password in the keyboard which appears, and touch ok.
The Administrator password is initially simply set to 'A'. For details regarding changing the user-level passwords, see
Tutorial B.
C10 HD Installation Guide
c .
onnectionS
c
onSole And
l .
oGin

A: IO Configuration

Section 4: Configuration | Page 4-7