System Menu; System Menu; Shutdown - Solid State Logic C10 HD Installation Manual

S m
yStem enu
Several useful configuration options can be found in the System menu within the Maintenance pages, including
an interface used for installing new software.
S
hutdown
The Shutdown pop-up provides four options:
To perform a controlled power down, press Shutdown and wait for the console computers to completely shut
down before switching the power off at the mains.
Pressing Full reboots both the processor core and integration computer immediately from the system disk and
generates an error log.
Pressing Quick allows for a much quicker restart whenever problems occur with the front panel or DSP. Quick
restarts the processor core which handles DSP and the control surface, but not the Linux integration computer which
provides console file management and network integration.
Note that Shutdown must ALWAYS be used before switching off the console.
Press cancel to clear the display without restarting or shutting down.
C10 HD Installation Manual Section 5: System Administration

System Menu

| Page 5-11