B: Console Configuration; B: C Onsole C Onfiguration - Solid State Logic C10 HD Installation Manual

B: Console Configuration

B: c c
onSole onFiGURAtion
This guide covers the setting up of user access, and the creation and basic configuring of projects. When the console is
first booted, it will boot with the Default Project. This Project can be used as a starting point for new configurations, and
includes basic softkey assignments and fader layouts which are described in the relevant Steps of this guide.
S B1: S B p
tep et the oot Roject
It is recommended that the console is set to boot up in the state it was in when it was last shut down. The Project that
is loaded when the console boots is defined in the project Status pop-up:
‰ Go to the StUdio ( ) pages, open the pRojectS ( ) menu and press the Status button:
The Boot project: box is initially set to default project.
‰ To set the console to boot in its last active state, touch the Boot project: box and select Background (current
settings):
C10 HD Installation Guide Section 4: Configuration | Page 4-21