Saving Files - Siemens SINUMERIK 840C Operator's Manual

6 Programming
6.2.5.2

Saving files

© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
NCK files can be copied from the NCK memory onto the hard disk as follows:
• Select the left-hand combo box with the EDIT key.
• Open the combo box with the RIGHT ARROW key and use the vertical
ARROW keys to position the selection bar on the workpiece in which the
file is to be saved.
• Press the INPUT key to enter the selected item in the left-hand combo box.
• Select the right-hand combo box with the EDIT key.
• Open the combo box with the RIGHT ARROW key and use the vertical
ARROW keys to position the selection bar on "NC Program Memory" or
"NC System Data".
Fig. 6-15 Saving files on the hard disk
• Press the INPUT key to enter the item in the combo box.
• Select the list box immediately underneath using the EDIT key.
• Position the selection bar on the desired file. Note the direction of the copy
arrow.
• Press the COPY softkey.
The selected file is copied from the NCK memory to the specified workpiece.
If a file with the same name already exists, a dialog box appears.
6FC5198-6AA60-0BP1
01.99
6-27