Copying Mda Programs - Siemens SINUMERIK 840C Operator's Manual

01.99
O verstore
Program
m o dific.
Note
4.2.6.1

Copying MDA programs

© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
The machine functions
• Overstore
• Program modification
are described in the "Additional machine functions" section.
The contents of the MDA program are retained if clear (CLR) is not active and
the softkey DELETE BLOCKS has not been pressed.
The contents of the MDA program can be copied into a part program using the
data selector (see next section).
First select the area Programming Edit NC.
A list appears with the program types MPF, SPF and MDA.
Fig. 4-21 List of program types in the NC editor
6FC5198-6AA60-0BP1
4 Machine
4-45