Status Displays; Channel-Independent Status Displays By Means Of Icons - Siemens SINUMERIK 840C Operator's Manual

01.99
4.2.3

Status displays

4.2.3.1

Channel-independent status displays by means of icons

Icon
1
2
0%
3
4
5
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
Three icon fields are provided underneath the clock. Three of the 5 existing
standard icons can be displayed. The following statuses can be displayed by
means of icons:
V24/Data in-out, as soon as data exchange with the I/O devices has been
activated. The symbol flashes during data transfer.
Override = 0%, if no traversing movement is active in any axis and the feed
override is set to 0% on at least one machine control panel.
Axis moves as soon as a traversing command is active.
Program is being executed when in one channel the signal "Program running"
is active.
Block search, program interrupt if the signal "Program running" is not active in
any channel and if a program interrupt is initiated by means of STOP,
operating mode change, or M00/M01 active, or if block search has been
triggered, or if the last block has already been executed in single block mode.
Icon 1 is only displayed in the 1st icon field
Icons 2 or 3 are displayed in the 2nd icon field
Icons 4 or 5 are displayed in the 3rd icon field
Machine manufacturer
Icons 2 to 5 must be configured by the machine manufacturer. See the machine
manufacturer's documentation.
6FC5198-6AA60-0BP1
4 Machine
4-9