Siemens SINUMERIK 840C Operator's Manual page 44

01.99
Operating modes
Table 2-1 Overview - Operating modes
Key symbol
REPOS and
reference point
Table 2-2 REPOS - Reference point
Key symbol
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
Definition
The axes are traversed
continuously in JOG mode using
the direction keys or
incrementally using the direction
keys or the handwheel
Interactive creation of programs
The machine is controlled by
executing a block or a series of
blocks. The operator panel is
used to input blocks
The machine is controlled by
automatic execution of programs.
If a mode key is pressed, the corresponding mode is selected and previously
selected modes and functions are cancelled.
The active mode is indicated and confirmed by the associated LED.
Definition
Repositioning, approach contour
again in JOG/TEACH IN mode
Approach reference point in JOG
mode
The REPOS function is only active in JOG and TEACH IN mode and can be
selected only in these modes.
The active function is indicated by the associated LED lighting up.
The function can be cancelled by pressing the function key again. The function
is also cancelled if you change the operating mode.
Designation of operating mode
.
Manual Data Automatic
.
Designation of function
Approach reference point
6FC5198-6AA60-0BP1
2 Operator Interface
JOG
Set-up
(Jogging)
TEACH IN
MDA
AUTOMATIC
REPOS
Reposition
REFPOINT
2-15