Select Program - Siemens SINUMERIK 840C Operator's Manual

6 Programming
6.3.1

Select program

E dit
E dit
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
Use the data selector to select the directory for subareas main programs,
subroutines and MDA programs. The following display appears, for example,
when you select area: Main programs:
Fig. 6-31 Overview "Main programs"
Place the cursor on the program that you wish to edit and press the softkey
EDIT. The part program is called up and can be edited.
If you wish to enter a new program, select MPF or SPF and then change to the
keyboard and enter the desired program number (as %, L, MPF, SPF).
Then press the softkey EDIT.
You can now edit the program (e.g. MPF100).
6FC5198-6AA60-0BP1
01.99
6-47