Siemens SINUMERIK 840C Operator's Manual page 116

01.99
Precondition
Operating
sequence
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
• The directory LOCAL designates the Windows directory on the local hard
disk that usually contains all the workpieces.
• Directory NCK is a virtual directory with which the user can return to the
part program overview of the NCK.
Machine manufacturer
The machine manufacturer can configure additional entries in the data
selector. These additional entries might be directories on the local hard disk
(also directories of the FlexOS file system), diskette drives and/or network
drives.
Please consult the documentation supplied by the machine manufacturer for
additional information.
The workpieces are stored in the directory LOCAL. A job list (load list) exists
for every workpiece.
Please refer to the Section "Programming" for more detailed information about
the job list.
Place the cursor on the directory LOCAL.
Now press the INPUT key. The workpieces in the directory LOCAL are listed.
Fig. 4-25 Workpiece selection 1
Now position the cursor on the required workpiece.
6FC5198-6AA60-0BP1
4 Machine
4-49