Siemens SINUMERIK 840C Operator's Manual page 294

01.99
Operating area
Operator interface
Operator panel
Overall reset
(general reset)
Overall reset mode
Parameter
Part program
PART program
manager
Path
PG
PLC
PLC
PLC block
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
The main operating areas are: Machine, Parameters, Programming, Services,
Diagnosis.
The operator interface is the means of providing a display in a CNC control
and is provided in the form of a screen. It has 7 horizontal and 7 vertical
softkeys.
The operator panel comprises a video display unit and an NC keypad. On the
slimline operator panel (TFT screen) the NC keypad is integrated in the
operator panel unit, as opposed to the CRT version. The operator panel is
linked to the operator panel interface with the first serial interface of the MMC
in the control.
The purpose of an overall reset is to clear specific areas of NCK and PLC
memory before starting up (again).
A special mode for installation and start-up of the control. In the overall reset
mode no axes can be traversed or part programs executed.
•
Operating area of the control
•
Value for setting or for controlling specific characteristics or functions of
physical modules and software programs.
A series of instructions to the NC control for producing a specific workpiece
part.
•
The part program manager on the MMC of the control is workpiece
oriented. Each workpiece is assigned a directory in which the data
required to produce a workpiece (e.g. part programs, tool offsets, R
parameters etc.) are stored.
•
On the NCK side, the part program manager is linear. Within the part
program memory (DRAM) the various part programs are linear, i.e. they
are stored without any kind of hierarchy cross-references.
Specifies the position of a file in the directory hierarchy on a hard disk.
Programming unit
Programmable Logic Controller: Component of the NC control; interface
control for handling the control logic in machine tools.
Electronic controllers whose function is stored as a program in the control unit.
The design and wiring of the unit do not therefore depend on the function of
the controller. The programmable logic controller has the same structure as a
computer: it comprises CPU (central controller) with memory, input/output
modules and internal bus system. The I/O devices and the programming
language (STEP 5 -> user program) are designed to suit the needs of control
technology.
-> User program
12 Abbreviations / Glossary
6FC5198-6AA60-0BP1
12-9