Siemens SINUMERIK 840C Operator's Manual page 6

Notes
Important
This Operator's Guide applies to:
SINUMERIK 840C OEM Version for Windows™ Software Version 5 (5.4)
and 6.
Machine manufacturer
For safety reasons, some of the functions are protected from access by
unauthorized persons. Please consult the information provided by the machine
manufacturer.
The following symbols with special significance are used in the documentation:
Note
The "Note" symbol always appears in this documentation to draw your
attention to information relevant to the subject at hand.
Important / Caution
This symbol shown here appears in this documentation when facts of
importance must be observed.
Ordering data option
Occasionally you will encounter in this documentation the symbol shown here
with a note referring to an option. The function described is only executable if
the option has been ordered with the control.
Machine manufacturer
The symbol shown here appears in this documentation whenever the machine
manufacturer can influence or modify the described function. Please observe
the machine manufacturer's specifications.
01.99