Operator Panel - Siemens SINUMERIK 840C Operator's Manual

2 Operator Interface
2.1

Operator panel

2-2
Different operator panels can be connected to the SINUMERIK 840C. The
following components can be added: machine control panel, hand-held unit and
PC standard keyboard (MF-2).
• 19" operating panel with 14" colour monitor
(2x7 softkeys, switchover keys)
• 19" NC full keyboard
(alphabetic group of keys, numeric group of keys, cursor group of keys)
• 19" slimline operator panel with 9.5" monochrome LC display including
NC full keyboard
(2x7 softkeys, switchover keys, alphabetic group of keys, numeric group of
keys, cursor group of keys)
• 19" slimline operator panel with 10" or 9.5" TFT colour LC display
including NC full keyboard
(2x7 softkeys, switchover keys, alphabetic group of keys, numeric group of
keys, cursor group of keys)
• PC standard keyboard (MF-2)
• 19" machine control panel, M version
• 19" machine control panel, T version
• Hand-held unit
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
01.99