Editing Data In The Parameter Area - Siemens SINUMERIK 840C Operator's Manual

5 Parameters
5.2

Editing data in the PARAMETER area

Preconditions
Note
5-4
You can edit the following data in the PARAMETER area:
• Program parameters (tool offsets, R parameters etc.)
• Setting data
The editing procedure is identical for all the data types in this area. The
following sections describe the operating procedure for editing data via the NC
keyboard.
With SW 4 and higher of SINUMERIK 840C, the function "Flexible memory
configuration" is provided for altering the memory allocation.
You can configure the size of the following memory areas:
1. User data
• Part programs
• IKA data
• UMS data
• R parameters
• TO data
2. Drive software
Number of real axes
3. Number of axis-specific measured values
4. Number of block buffers in block memory
Please consult the machine manufacturer's documentation.
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
01.99