Creating Job Lists - Siemens SINUMERIK 840C Operator's Manual

01.99
6.2.3.1

Creating job lists

6-14
If no job list is in the selected workpiece, you can create a standard job list by
creating a new workpiece and copying the standard job list from here to the
desired directory:
• Activate the Program Management window.
• Create a new workpiece.
A standard job list is automatically generated when the workpiece is created. It
then serves as a template for the job list in your selected workpiece.
• In the left-hand single-line box, select the workpiece for which you want to
create a job list (example: [welle_1]).
• In the right-hand single-line box, select the workpiece that you have already
created (e.g. [welle_2]). Check that the selection bar is highlighting the file
"job" in the right-hand list box.
Fig. 6-7

Creating job lists

• Select the COPY command from the softkey bar of the data manager.
The job list is copied from workpiece [welle_2] to the selected workpiece and
can be edited with the WEdit editor.
6FC5198-6AA60-0BP1 © Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
6 Programming