Siemens SINUMERIK 840C Operator's Manual page 104

01.99
Note
Insert block
Generate block
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
You can also accept the positions by entering the axis names in the input line.
The input line can also be activated via the END key.
Use the keyboard to enter in the input line the names
of the axes the positions of which you wish to save in the block (e.g. Y X Z).
Press softkey ACCEPT POSITION. Only the axis positions defined in the
input line are accepted regardless of the settings in the "Axis selection" screen.
By pressing the END key you can return to the edit window.
You can insert a block before the teach block.
Position the cursor on the first digit of the teach block (the 'N' of N20) and
press the INPUT key.
MPF 4711 Workpiece SHAFT1
N10 X0 Y0 Z0 G0 L
N15 Y125 G1 F500 L
L
F
N20 G0 Y0 L
F
Fig. 4-14 Insert block
You can edit or insert the axis positions with "Accept position" in this
generated block.
Position the cursor on the first digit of the teach block (the "N" of N20 in the
figure).
Insert 4
F
F
6FC5198-6AA60-0BP1
4 Machine
End
or
4-37