Saving Energy Without Sacrificing Comfort - Siemens Synco 700 RMB795 Operating Instructions Manual

Saving energy without sacrificing comfort

• During the day, do not allow the room temperature to
exceed 21 °C when heating. Each additional degree
increases heating costs by 6 to 7 %
• During the day, do not allow the room temperature to
fall below 24 °C when cooling. Each degree below that
level increases cooling costs
• Guide values for room temperatures in living and
working spaces:
− During the day in the heating period:
Precomfort = 19 °C, Comfort = 20...22 °C
− During the day in the cooling period:
Precomfort = 28 °C, Comfort = 22...24 °C
− During the night in the heating period:
Economy = 14...18 °C. Protect objects sensitive to
low temperature, such as plants!
− During the night in the cooling period:
Economy = 29...31 °C
Energy savings do not only conserve our natural resources, they also ensure active environmental protection!
Siemens Building Technologies / HVAC Products
• Ensure that there are no curtains, furniture or other
objects in front of or behind air inlets and outlets. They
have an impact on air circulation and can cause drafts
• Closed shutters and blinds reduce heat losses
• Closing blinds in due time during the cooling season
reduces the impact of solar radiation, thus saving
cooling costs
• Make sure air filters are checked and replaced at
regular intervals
If your plant uses a room unit with temperature and
humidity sensor, it should not be exposed to thermal and
moisture disturbances since these affect the control
function. For this reason, following applies to the refer-
ence room where the room unit is located:
• Avoid drafts through open doors
• Avoid heat gains from people, machines and lighting
• Ensure that there are no curtains, furniture or other
objects in front of temperature and humidity sensors
CE1B3121x2-en 74 319 0462 0 a
25
15.04.2005