Siemens SINUMERIK 840C Operator's Manual page 148

01.99
Without including
the tool offset
C orrection
0
num ber
=
Sto re act.
value
Delete
offset
i
© Siemens AG 1999 All Rights Reserved
SINUMERIK 840C, OEM Version for Windows (BA)
Enter the appropriate value (0 = positive, 1 = negative) via the keyboard.
Confirm your input by pressing the INPUT key.
Enter the value 0 and press the CORRECTION
NUMBER softkey.
After having selected this data, enter the actual PRESET offset.
Enter the axis name and the new actual value for the axis.
Conclude the input by pressing the STORE ACTUAL VALUE softkey.
The DELETE OFFSET key is used to clear all PRESET offsets of the selected
mode group.
The offset displayed includes the input value and the included tool correction.
If the "Help" key is pressed once the function has been selected, information on
the function is displayed on the screen.
The PRESET offset remains stored:
• After "End of program"
• After RESET.
Machine manufacturer
Machine data is used to determine whether the PRESET offset is deleted
automatically:
• When the control is switched on
• When the reference point is approached
(See the machine tool manufacturer's documentation).
6FC5198-6AA60-0BP1
4 Machine
4-81