Audio Output Overview; Reset Mode - Extron electronics XTP R HWP 201 User Manual

Audio Output Overview

By default, an XTP transmitter or matrix switcher prioritizes embedded digital audio over
analog audio. See the table below for a list of supported audio formats.
Audio Input Format
2-channel LPCM up to 48 kHz
Multi-channel PCM up to 7.1, 192 kHz
Dolby Digital up to 5.1
Dolby Digital EX
Dolby Digital Plus
Dolby TrueHD
DTS Digital Surround up to 5.1
DTS-ES Matrix 6.1
DTS-ES Discrete 6.1
DTS-HD
DTS-HD Master Audio

Reset Mode

Use the recessed
panel of the receiver to restore factory-shipped firmware. To access the
faceplate may need to be removed.
Mode Mode Activation
Hold down the recessed
button while applying power to the
device.
NOTE: After a mode 1 reset,
Factory
1
update the device with the
Reset
latest firmware version. DO
NOT operate the firmware
version that results from this
mode reset.
Available Audio Formats on Output Connectors
button (see figure
Reset
Reset Mode Summary
The device reverts to the factory
Reset
default firmware.
NOTE: If you do not want
to update the firmware or
perform a mode 1 reset by
mistake, cycle power to
the device to return to the
firmware version running prior
to the reset.
XTP R HWP 201 Wallplate Receiver • Operation
HDMI Analog
Yes Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
14, on the previous page) on the front
B
Result Purpose and Notes
Use mode 1 to return
to factory firmware for
a single power cycle if
an incompatibility issue
arises.
button, the
Reset
18