Table of Contents
Advertisement
Software Operation
The XTP R HWP 201 can be controlled directly from the front panel configuration port (see
figure
Connections
The XTP System Configuration Software opens to the
used to establish communication with an XTP device through USB connection. Ensure the
receiver is connected and powered on before attempting to connect to it.
Figure 20.
To connect to a device:
1.
2.
3.
4.
8,
on page 10) or remotely from an XTP matrix switcher.
E
Connections Screen
Open the XTP System Configuration Software.
From the
screen in the XTP Configuration Software, select the
Connections
button (see figure 18,
).
1
From the displayed list, select the connected device to be controlled (
Click the
button (
Connect
3
Settings
on page 30).
XTP R HWP 201 Wallplate Receiver • XTP System Configuration Software
Connections
). The
screen opens (see
Device Settings
screen. This screen is
radio
USB
).
2
Device
26
Advertisement
Table of Contents
