Rear Panel Hdmi Audio Switch; Audio Output Overview; On-Screen Display Menu System - Extron electronics XTP SR HDMI User Manual

F
G

Rear Panel HDMI Audio Switch

The XTP SR HDMI has an HDMI audio switch on the rear panel that
mutes or unmutes the embedded audio on the HDMI output connector
(see
HDMI audio is enabled.
Move and hold the rear panel HDMI audio switch up until the Audio LED lights (about
1 second) to enable embedded audio on the associated HDMI connector, or move and
hold the HDMI audio switch down until the AUdio LED turns off (about 1 second) to disable
embedded audio on the associated HDMI connector. The switch returns to the middle
position after it has been released so the device can continue to be controlled through SIS
commands or from an XTP matrix switcher.

Audio Output Overview

By default, an XTP transmitter or matrix switcher prioritizes embedded digital audio over
analog audio. Use SIS commands (see
the XTP System Configuration Software (see
page 32) to manually select the audio input.
Audio Input Format
2-channel LPCM up to 48 kHz
Multi-channel PCM up to 7.1, 192 kHz
Dolby Digital up to 5.1
Dolby Digital EX
Dolby Digital Plus
Dolby TrueHD
DTS Digital Surround up to 5.1
DTS-ES Matrix 6.1
DTS-ES Discrete 6.1
DTS-HD
DTS-HD Master Audio

On-Screen Display Menu System

XTP SR HDMI configuration and adjustments can be performed by using SIS commands
(see
Software (see
panel controls and the OSD menu. The OSD menu is used primarily when the receiver is
first set up.
NOTE: The OSD menu has a fixed time-out of 10 seconds.
Enter button — Press this button (see
the OSD menu or enable or disable front panel lockout mode (see
Lockout Mode (Executive Mode)
Adjustment knobs — Rotate the horizontal (
figure 9, on the previous page) to navigate the on-screen display menu or adjust
G
submenu items.
figure 2, on page 4). The LED next to the switch lights when
D
Audio Format Availability on Receiver Audio Outputs
SIS Configuration and Control
XTP System Configuration Software
figure 9, on the previous page) to navigate
F
on page 22).
[ {
) or vertical (
SIS Configuration and Control
XTP System Configuration Software
Audio Output
HDMI S/PDIF
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
on page 23), the XTP System Configuration
on page 32), or by using the front
XTP SR HDMI Scaling Receiver • Operation
Front Panel
) adjustment knob (see
AUDIO
ON
OFF
HDMI
on page 23) or
on
Analog
Yes Yes
Yes
Yes
Yes
Yes
Yes
15