Hdcp Output; Audio Configuration; Audio De-Embedding; Audio Output Volume - Extron electronics FOX3 SR 301 User Manual

Fiber optic hdmi scaling receivers
Hide thumbs Also See for FOX3 SR 301:
Table of Contents

Advertisement

HDCP Output

The output is pre-authenticated and encrypted, in accordance with the configured HDCP
output mode using PCS (see the FOX3 SR 301/311 Using PCS Help File).
If an output requires encryption, but the connected sink device cannot be authenticated,
that output displays a green screen.
HDCP output modes

Audio Configuration

Audio De-embedding

The FOX3 supports a single audio signal to pass LPCM-2CH. When the audio from the
transmitter is LPCM-2CH, the HDMI audio signal is output on the HDMI output and the
analog audio output.

Audio Output Volume

Adjust the overall output volume level for the receiver analog audio output as
well as the embedded LPCM-2CH audio on the HDMI output via PCS (see the
FOX3 SR 301/311 Using PCS Help File) or SIS command (see
page 30).
The audio level is adjusted from 0% to 100% in 1dB steps, default is 100%.

Audio Mute

Mute audio on the HDMI output, and analog audio output individually via PCS (see the
FOX3 SR 301/311 Using PCS Help File) or SIS commands
Return or Analog Audio Out

Audio Return

Send audio back from the receiver location to the transmitter location via the audio return
ports. Connect an analog audio input to the receiver Audio Return input to pass it over the
fiber link and output it on the transmitter Audio Return out.
NOTE: To receive audio return, two fiber optic cables must be connected.
Follow Input (default) — Output authentication and encryption follows input status.
Authentication times out after ~10 seconds.
Always Encrypt Output — The output is always authenticated and encrypted.
Authentication times out after ~10 seconds.
Follow Input (with continuous trials) — Output authentication and encryption follows
input status with no authentication timeout.
Always Encrypt Output (with continuous trials) — The output is always
authenticated and encrypted with no authentication timeout.
Disable Authentication — The output is never authenticated or encrypted. When an
HDCP encrypted input signal is detected, the display always shows a green screen.
FOX3 SR 301 and FOX3 SR 311 Scaling Receivers • Operation
on page 27).
Audio output volume
Audio mute — Digital Output,
on
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fox3 sr 311

Table of Contents