Using the Command and Response Tables for SIS Commands
command and response tables
The
that the transmitter recognizes as valid, the responses that are returned to the host, and a
description of the command function or the results of executing the command. Commands
can be entered back-to-back in a string with no spaces. Figure 16 shows the hexadecimal
equivalent of ASCII characters used in the command and response tables.
NOTE: Upper and lowercase text can be used interchangeably unless otherwise stated.
Space
Figure 16.
Symbol Definitions
= Carriage return and line feed
]
= Carriage return with no line feed
}
|
= Pipe (can be used interchangeably with the
•
= Space
E
= Escape key
W
= Can be used interchangeably with the
ASCII to Hex Conversion Table
ASCII to Hexadecimal Conversion
XTP R HWP 201 Wallplate Receiver • SIS Configuration and Control
beginning on the next page list the commands
•
}
character).
E
character.
21