Table of Contents
Advertisement
EDID
NOTE: In matrix applications, EDID on the transmitter is assigned by the matrix switcher
using the XTP System Configuration Software.
The XTP FT HD 4K can record and save EDID in a user memory location on the transmitter.
EDID can come from the loop-through display on the transmitter or the output display on
the receiver. For EDID management, see XTP System Configuration Software (see
Minder
on page 28).
Audio Output Overview
By default, the XTP FT HD 4K prioritizes embedded digital audio over analog audio. Use
SIS commands (see
Configuration Software (see
manually select the audio input.
Audio Input Format
LPCM up to 7.1, 24 bit, 192 kHz
Multi-channel PCM
Dolby Digital 2/0
Dolby Digital 2/0 Surround
Dolby Digital 5.1
Dolby Digital EX
Dolby Digital Plus
Dolby TrueHD
DTS 2 Channel
DTS Digital Surround 5.1
DTS-ES Matrix 6.1
DTS-ES Discrete 6.1
DTS-HD
DTS-HD Master Audio
NOTES:
•
To pass analog audio without video to a display connected to the HDMI output
connector on a connected receiver, the transmitter sends a black signal to simulate
one of the following video signals:
•
•
•
•
To set the black signal, see the
page 20 or
XTP FT HD 4K Fiber Transmitter and XTP FR HD 4K Fiber Receiver • Installation
SIS Configuration and Control
XTP System Configuration Software
Audio Input Format Availability on Audio Outputs
720p @ 50 Hz
720p @ 60 Hz (default)
1080p @ 60 Hz
Transmitter device settings
on page 16) or the XTP System
Audio Output
HDMI
S/PDIF
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Black signal resolution
SIS commands on
on page 25.
EDID
on page 24) to
Analog
Yes
14
Advertisement
Table of Contents
