Introduction; Guide Overview; Xtp R Hwp 201 Wallplate Receiver Description - Extron electronics XTP R HWP 201 User Manual

Introduction

This section contains general information about this guide and the Extron XTP R HWP 201
Wallplate Receiver, and selected device features. Topics in this section include:
•
•
•
•

Guide Overview

This guide contains installation, operation, and control procedures, as well as reference
information for the XTP R HWP 201 Wallplate Receiver. In this guide, the terms
"XTP R HWP 201" and "receiver" are used interchangeably to refer to all models of the
XTP R HWP 201 Wallplate Receiver.

XTP R HWP 201 Wallplate Receiver Description

The Extron XTP R HWP 201 is a-style wallplate receiver, ideal for XTP Systems that
include wall-mounted displays. The HDMI output connector is oriented upward at a 90°
angle, which minimizes stress on the cable and allows for a low-profile flat panel display
installation. The receiver accepts XTP signals from up to 330 feet (100 meters) away over a
single shielded twisted pair cable. It outputs video, audio, bidirectional RS-232 and IR, and
Ethernet to the display. It also provides HDMI audio de-embedding with analog stereo audio
output and volume control.
The XTP R HWP 201 can be powered locally or remotely through an Extron Power Injector
or XTP matrix switcher (see
To configure and control the XTP R HWP 201, connect a host device, such as a computer,
through the USB Config port and enter Simple Instruction Set (SIS) commands (see
Configuration and Control
(see
Guide Overview
XTP R HWP 201 Wallplate Receiver Description
System Compatibility
Features
Power Connection
on page 20) or use the XTP System Configuration Software
XTP System Configuration Software
on page 14).
on page 24).
XTP R HWP 201 Wallplate Receiver • Introduction
SIS
1