Audio Output - Extron electronics TP Receivers User Manual

Audio
Number/signal type..................... 1 or 2 sets of analog proprietary signals
Connectors ..................................... 1 or 2 shielded RJ-45 female
Frequency response ...................... 20 Hz to 20 kHz, >±0.05 dB
THD + Noise .................................. 0.03% @ 1 kHz, 0.3% @ 20 kHz at
S/N.................................................. >63 dB at nominal level
Crosstalk......................................... <-80 dB @ 1 kHz, fully loaded
Stereo channel separation ............ >80 dB @ 1 kHz
CMRR.............................................. >33 dB @ 20 Hz to 20 kHz
Audio input — refer to the TP Transmitters Family
User's Manual, part #68-546-02
N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output

Number/signal type
TP R BNC A........................ 1 stereo audio balanced/unbalanced, and
TP R 15HD A...................... 1 stereo audio balanced/unbalanced
TP R BNC AV ..................... 2 stereo audio balanced/unbalanced, and
Connectors
TP R 15HD A...................... (1) 3.5 mm, 5-pole captive screw connector
All other models................ 2 female RCA (left/right) per input
Impedance...................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ....................................... ±0.1 dB channel to channel
Maximum level (600 ohm)........... >+11.5 dBm, balanced at 1%THD+N
General
Power (TP R BNC AV) .................. 100 VAC to 240 VAC, 50-60 Hz, 40 watts,
External power supply (all models except TP R BNC AV)
Power input requirements
TP R BNC A ....................... 15 VDC, 0.3 A (minimum)
TP R 15HD A...................... 15 VDC, 0.34 A (maximum)
TP Receivers • Specifications, Accessories, and Part Numbers
maximum output (unweighted)
1 stereo audio unbalanced
2 stereo audio unbalanced
per input
(1) 3.5 mm, 5-pole captive screw connector
per input
internal
100 VAC to 240 VAC, 50-60 Hz, external; to
15 VDC, 0.8 A, regulated
A-3