Table of Contents
Advertisement
Device Settings
The
Device Settings
device directly connected to the PC running the XTP software. Click the
button (see figure 28,
screen.
Figure 28.
Video panel
The
Video
Video Mute — Click the
2
NOTE: The button turns red when the video output is muted.
Relay Control panel
The
Relay Control
Audio panel
The
Audio
enable analog audio for displays connected through DVI.
Audio Output — Click the
4
NOTE: The button turns red when the output audio is muted.
Analog Audio — If applicable, move the
adjust the audio volume in percentage or select an amount in the field below the slider
to adjust the audio volume in decibels.
NOTE: 0 dB = 100% volume and -64 dB = 0% volume.
If a display is connected through a DVI connection, click the check box below the
Analog Audio Volume
screen allows a user to view and edit various device settings for the
) on the
1
Global Navigation
Receiver Device Settings Screen
panel contains an option to mute the output video.
Video Mute
panel (
) is not applicable to the XTP R HWP 201.
3
panel contains an option to mute all audio outputs, adjust output volume, or
Mute All
slider to output analog audio.
XTP R HWP 201 Wallplate Receiver • XTP System Configuration Software
bar to open the
button to mute or unmute the output video.
button to mute or unmute all audio outputs.
Analog Audio Volume
Device Settings
Device Settings
slider up or down to
30
Advertisement
Table of Contents
