Mounting the XTP R HWP 201
NOTE: Some connectors and features are inaccessible after the device is mounted or
Figure 6.
Cable
Clamp
Figure 7.
1.
2.
3.
the faceplate is attached.
1
XTP R HWP 201
Decorator-Style Faceplate
Installing the XTP R HWP 201 in the Provided Mud Ring
Wall Stud
1
1
XTP R HWP 201
Signal Output
Cable
Decorator-Style Faceplate
Installing the XTP R HWP 201 in a Metal Junction Box
Align the mounting screws on the XTP R HWP 201 with the available holes on the mud
ring (see figure 6,
) or metal junction box (see figure 7,
1
Using the provided screws, attach the XTP R HWP 201 to the mud ring (see
figure 6,
) or metal junction box (see figure 7,
2
Use four mounting screws to attach the decorator-style faceplate to the
XTP R HWP 201 (see figure 6 or 7,
2
3
2
2
3
3
).
2
).
3
XTP R HWP 201 Wallplate Receiver • Installation
).
1
9