Implemented Protocols In Unigate; Protokoll: Transparent; Data Structure; Protocol: Universal 232 - DEUTSCHMANN AUTOMATION UNIGATE CL-Fast Ethernet Instruction Manual

Implemented protocols in UNIGATE® CL with Universal Script

10 Implemented protocols in UNIGATE

Script
®
UNIGATE CL is supplied with the Script "Universal Script Deutschmann". The configuration of
the protocols is carried out by means of the software WINGATE. See "Instructions UNIGATE
- Configuration with WINGATE". The PDF can also be found on our website under Support/Sup-
port/Downloads/Manuals.
Attention:
If a Reset Device is carried out it is possible (depending on the firmware
version of the UNIGATE) that the "Universal Script" will get lost and must
be played in again.
The Script can be found on the Deutschmann Support-DVD in the folder
\Software\ProtocolDeveloper\Example\Universal\.

10.1 Protokoll: Transparent

The data is transferred bidirectional from the UNIGATE

10.1.1 Data structure

10.2 Protocol: Universal 232

The protocol designation "Universal 232" and the relation to the
"RS232-interface" in the description have eveloped over the years. The
protocol also works with RS422 and RS485 though!
10.2.1 Data structure

10.2.2 Fieldbus parameters

Trigger byte: See "The trigger byte", Chapter 10.5‚ on page 27
Length byte: See "The length byte", Chapter 10.6‚ on page 27
22 UNIGATE Fieldbus Gateway UNIGATE
®
Deutschmann Automation GmbH & Co. KG
® CL with Universal
®
.
CL - Fast Ethernet V. 2.6
®
®
CL
21.6.18