Reset Inventories - Emerson Micro Motion 2700 Configuration And Use Manual

Transmitter operation
•
•
8.8

Reset inventories

ProLink III
136
Reset and Yes? alternately flash beneath the current totalizer value.
5. Select again to confirm.
6. Scroll to EXIT.
7. Select.
To reset the volume totalizer:
1. Scroll until the volume totalizer value appears.
2. Select.
Exit displays beneath the current totalizer value.
3. Scroll until Reset displays beneath the current totalizer value.
4. Select.
Reset and Yes? alternately flash beneath the current totalizer value.
5. Select again to confirm.
6. Scroll to EXIT.
7. Select.
To reset the gas standard volume totalizer:
1. Scroll until the gas standard volume totalizer value appears.
2. Select.
Exit displays beneath the current totalizer value.
3. Scroll until Reset displays beneath the current totalizer value.
4. Select.
Reset and Yes? alternately flash beneath the current totalizer value.
5. Select again to confirm.
6. Scroll to EXIT.
7. Select.
Device Tools > Totalizer Control > Totalizer and Inventories > Reset Mass Inventory
Device Tools > Totalizer Control > Totalizer and Inventories > Reset Volume Inventory
Device Tools > Totalizer Control > Totalizer and Inventories > Reset Gas Inventory
Device Tools > Totalizer Control > Totalizer and Inventories > Reset All Inventories
Micro Motion Model 2700 Transmitters with Intrinsically Safe Outputs