Emerson Rosemount 2051HT Quick Start Manual
Hygienic pressure transmitter with profibus protocol
Hide thumbs
Also See for Rosemount 2051HT:
- Quick start manual (18 pages) ,
- Quick start manual (32 pages) ,
- Quick start manual (32 pages)
Related Manuals for Emerson Rosemount 2051HT
Summary of Contents for Emerson Rosemount 2051HT
- Page 1 Quick Start Guide 00825-0300-4591, Rev BA November 2019 ™ Rosemount 2051HT Hygienic Pressure Transmitter ® with PROFIBUS Protocol...
- Page 2 Quick Start Guide November 2019 Contents About this guide...........................3 Transmitter installation........................ 6 Basic configuration........................13 Product certifications......................... 16 Emerson.com/Rosemount...
-
Page 3: About This Guide
November 2019 Quick Start Guide About this guide Safety messages This guide provides basic guidelines for the Rosemount 2051HT Transmitter. It does not provide instructions for configuration, diagnostics, maintenance, service, troubleshooting, Explosion-proof, Flameproof, or intrinsically safe (I.S.) installations. CAUTION The products described in this document are NOT designed for nuclear- qualified applications. - Page 4 • Physical security is an important part of any security program and fundamental to protecting your system. Restrict physical access by unauthorized personnel to protect end users’ assets. This is true for all systems used within the facility. Emerson.com/Rosemount...
- Page 5 November 2019 Quick Start Guide WARNING Replacement equipment or spare parts not approved by Emerson for use as spare parts could reduce the pressure retaining capabilities of the transmitter and may render the instrument dangerous. • Use only bolts supplied or sold by Emerson as spare parts.
-
Page 6: Transmitter Installation
2.1.1 Conduit entry orientation When installing a Rosemount 2051HT, it is recommended installing so a conduit entry faces downward toward the ground to maximize drainability when cleaning. 2.1.2... - Page 7 November 2019 Quick Start Guide 2.1.3 In-line gage transmitter orientation The low side pressure port (atmospheric reference) on the in-line gage transmitter is located on the neck of the transmitter via a protected gage vent (See Figure 2-2). Keep the vent path free from obstructions including but not limited to paint, dust, and viscous fluids by mounting the transmitter so the process can drain away.
- Page 8 The device description loaded in the host system must be at the same revision as this device. The device description can be downloaded from the by selecting Download host system website or Emerson.com/Rosemount Device Drivers under Product Quick Links. You can also visit Fieldbus.org select End User Resources.
- Page 9 November 2019 Quick Start Guide Procedure 1. If the transmitter is installed, secure the loop, and remove power. 2. Remove the housing cover opposite the field terminal side. Do not remove the instrument cover in explosive atmospheres when the circuit is live. 3.
- Page 10 7. If transient protection is needed, refer to section “Signal ground wiring” for grounding instructions. 8. Plug and seal unused conduit connections. 9. Reattach the transmitter covers. It is recommended that the cover be tightened until there is no gap between the cover and the housing. Emerson.com/Rosemount...
- Page 11 November 2019 Quick Start Guide 10. The covers must only be capable of being released or removed with the aid of a tool to comply with applicable ordinary locations requirements. Example Figure 2-5: Wiring Aluminum Polished 316 SST A. Minimize distance B.
- Page 12 The covers must only be capable of being released or removed with the aid of a tool to comply with applicable ordinary locations requirements. 5. Plug and seal unused conduit connections. Note The Rosemount 2051HT polished 316 SST housing only provides ground termination inside the terminal compartment. Emerson.com/Rosemount...
-
Page 13: Basic Configuration
November 2019 Quick Start Guide Basic configuration Configuration tasks The transmitter can be configured via either the local operator interface ™ (LOI) - option code M4, or via a Class 2 Master (DD or DTM based). The two basic configuration tasks for the PROFIBUS PA Pressure transmitter are: Procedure 1. - Page 14 Characters blink when they can be changed. Figure 3-1: LOI Menu Class 2 Master The Rosemount 2051 Profibus DD and DTM files are available at Emerson.com or by contacting your local salesperson. See Table 3-2 steps to configure the transmitter for Pressure measurement. See the...
- Page 15 2051 specific (rmt3333.gsd) or Profile 3.02 Generic (pa139700.gsd). These files can be found on Emerson.com or Profibus.com. Configuration host (class 2) The appropriate DD or DTM file must be installed in the configuration host. These files can be found at Emerson.com. Quick Start Guide...
-
Page 16: Product Certifications
A copy of the EU Declaration of Conformity can be found at the end of the Quick Start Guide. The most recent revision of the EU Declaration of Conformity can be found at Emerson.com/Rosemount. Ordinary Location Certification As standard, the transmitter has been examined and tested to determine... - Page 17 November 2019 Quick Start Guide be taken into account during installation and use to prevent impact and friction. ® Certificate: 2041384 (HART/Fieldbus/PROFIBUS Standards: ANSI/ISA 12.27.01-2003, CSA Std. C22.2 No.142-M1987, CSA Std. C22.2. No.157-92 Markings: IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E, F, G; Class III; DIV 1 when connected per Rosemount drawing 02051-1009;...
- Page 18 3. The equipment contains thin wall diaphragms. The installation, maintenance and use shall take into account the environmental conditions to which the diaphragms will be subjected. The manufacturer’s instructions for installation and maintenance shall be followed in detail to assure safety during its expected lifetime. Emerson.com/Rosemount...
- Page 19 November 2019 Quick Start Guide Additional Certifications ® All Rosemount 2051HT transmitters with the following connections are 3-A approved and labeled: T32: 1½-in. Tri-Clamp T42: 2-in. Tri-Clamp If process connection B11 is selected, please reference the ordering table of the Rosemount 1199 Diaphragm Seal...
- Page 20 Quick Start Guide November 2019 Rosemount 2051HT Declaration of Conformity Emerson.com/Rosemount...
- Page 21 November 2019 Quick Start Guide Quick Start Guide...
- Page 22 Quick Start Guide November 2019 Emerson.com/Rosemount...
- Page 23 November 2019 Quick Start Guide 4.10 China RoHS Rosemount 2051HT China RoHS List of Rosemount 2051HT Parts with China RoHS Concentration above MCVs / Hazardous Substances Hexavalent Polybrominated Polybrominated Part Name Lead Mercury Cadmium Chromium biphenyls diphenyl ethers (Pb) (Hg)
- Page 24 The Emerson logo is a Twitter.com/Rosemount_News trademark and service mark of Emerson Electric Facebook.com/Rosemount Co. Rosemount is a mark of one of the Emerson Youtube.com/user/ family of companies. All other marks are the RosemountMeasurement property of their respective owners.