Appendix F
NE 53 history
F.1
NE 53 history
Important
Not all features and capabilities described in this section may apply to your transmitter or
configuration.
August 2000, Version 1.x
Modification type
Expansion
Adjustment
Feature
May 2001, version 2.x
Modification type
Expansion
Adjustment
Feature
Configuration and Use Manual
Change
Added writing of the device tag using Modbus
Improved communication handling with the HART Tri-Loop prod-
uct
Indication of outputs option board type appears on display at
power-up
Change
•
Added alarm A106 to indicate that HART burst mode is ena-
bled
•
Indication of outputs option board type appears on display at
power-up
•
Added alarm A106 to indicate that HART burst mode is ena-
bled
•
Control of HART burst mode now available via Modbus
•
Added support for the Model 1700 transmitter
•
Added support for the intrinsically safe transmitter option
•
Added support to configure the process variable units for
mass flow, volume flow, density and temperature from the
display
•
Added support for assigning process variables to the mA and
Frequency Output from the display
Clarified the interaction of the digital fault setting and the fault
timeout (last measured value timeout)
•
Drive gain can be assigned to mA Output
•
Pressure compensation added via HART
•
Channel B can be configured as a Discrete Output
NE 53 history
253