Welch Allyn Acuity Directions For Use Manual page 54

50 Chapter 4 Adjust monitoring settings and patient information
Coordinate system print jobs and central station printers
This section presents the Acuity Central Station Printer window, from which you can
coordinate printers and pending print jobs for the entire Acuity System.
To coordinate print jobs
1. On the Acuity Central Station map where the Acuity Central Station icon is located,
click
The Print Jobs view of the Central Station Printer window appears.
Processing
the request
Print next
Alarm print
Printer status
2. Click a print job to highlight it.
3. Click any of these buttons:
•
•
Note
To coordinate printers
1. Click
The Printers View appears.
2. Do any of these things:
•
•
.
Click Print Next to print the job next.
Click Delete, and then Delete Selection to delete the print job.
If appears beside a print job, see
information.
.
Read messages to check printer status.
Click a printer to highlight it, and then click Disable to disable the printer or
Enable to enable the printer.
Welch Allyn Acuity Central Monitoring System
Table 18 on page 163 for troubleshooting