Welch Allyn Acuity Directions For Use Manual page 104

100 Chapter 6 Review or print patient data
Adjust the graphical trends display and locate events
To adjust the time period shown in the graphs area of the window
1. Under Time Span, click a button.
Time markers show along the top of the graphs area.
2. Click on the time line to display data from a different time period.
Along the time line, patient alarms are red.
3. Click
Click
To select and adjust the trend graphs
1. Under Trends, check boxes to display associated trend graphs.
2. Click Scales, and then make a selection.
To locate and display alarm and event information
1. Click any of these things for details:
•
•
The blue cursor bar identifies event types and shows numeric values along each trend
graph.
2. Click
or to scroll the display forward or backward.
or to page the display forward or backward.
Click a red (alarm) area along a trend graph.
Along the top of the window, click an event marker.
▼ indicates Relearn, Learning Done or Snapshot Print events.
♥
indicates that an arrhythmia alarm was recorded.
♥
indicates that an arrhythmia event was detected, but no alarm occurred
because alarming for this arrhythmia type was turned off in the Arrhythmia
Alarms Setup window.
or to jump to the next or previous alarm.
Welch Allyn Acuity Central Monitoring System
▼
Event marker
♥
Arrhythmia event marker
SpO Perfusion Index (PI).
2
For more information, refer
to Masimo Corporation
literature.
Cursor bar
Time line