Welch Allyn Acuity Directions For Use Manual page 185

Directions for use
Table 27. Alarm and alert indications at the Acuity System Virtual Monitor
Display Priority Virtual Monitors in alarm
Indications
Message
Priority
Alarms Monitor equipment alerts
(red) (yellow)
Virtual Monitors in alert state
"bump" those not in alarm, are not automatically
when necessary. displayed.
Violating vital sign's numeric Equipment Alert status
is highlighted. +++ means window appears in Virtual
measured values fall above Monitor.
the monitor's range,
--- means they fall below, and For most, a specific message
??? means they could not be appears in border.
measured.
Status icon.
Specific message appears in
border.
Status icon.
Displays highest level If more than one monitor
message for each patient. equipment alert occurs for
one monitor at once, a
"Multiple" message appears
in border.
Chapter 11 Specifications
System-wide Patient
equipment information
alerts alerts
(yellow) (yellow)
No displays in Virtual Monitors in
Virtual Monitor. alert state are not
automatically
displayed.
No indications in Specific message
Virtual Monitor. in border.
Status icon.
No messages in Alarms and
Virtual Monitor. monitor
equipment alerts
take priority over
low-level alerts.
181