Welch Allyn Acuity Directions For Use Manual page 130

126 Chapter 7 Move a monitored patient
Arrange a patient move from the Acuity Central Station
If you want to arrange a patient transfer to another unit, you must do so in the unit from
which the patient is transferring.
To arrange a patient move from the Acuity Central Station
1. In the lower left corner of the Acuity Central Station screen, click
The Patient List window opens.
2. Click the patient name.
3. Click Transfer.
The Transfer Patient window appears.
4. Click the unit name in the list, even if the patient will stay in the same unit.
5. Take one of these steps:
•
•
6. Click Confirm.
If the patient is currently connected to a hardwired patient monitor, the information is
stored at the Acuity Central Station and the patient map icon remains in the original
position and state until the move takes place.
If the patient is connected to a wireless patient monitor and transferred to a new unit,
the patient map icon appears at the new central station. If you did not enter the room
number, the icon remains in the yellow RM unconfirmed state until the room is
confirmed.
If you know the room number, click the new room.
If you do not know the room number, click UNASSIGNED.
You can enter the room number later via the Patient List or the Virtual Monitor.
Welch Allyn Acuity Central Monitoring System
.