Welch Allyn Acuity Directions For Use Manual page 109

Directions for use
Display waveforms and events
To select and adjust waveforms
1. Check up to five boxes to display waveforms for corresponding vital-signs and ECG
lead sources.
If the patient monitor includes SpO
occupies a waveform slot in the display.
2. Click Scales, and then make a selection.
3. Click under mm/sec to adjust sweep speeds.
To adjust the period shown in the window
1. Click on the time line to display waveforms from a different time period.
Along the time line, patient alarms are red.
2. Scroll the waveforms.
Click
Click
Time Line
2
or to scroll forward or backward.
or to page forward or backward.
Chapter 6 Review or print patient data
•
Beat labels: Normal ( ) and ventricular (
Signal IQ detection and you check SpO
105
v
)
, SIQ
2