Welch Allyn Acuity Directions For Use Manual page 201

Directions for use
Table 41. Review window
Features
Display priority of waveforms
Period displayed
ECG lead, RESP lead and CO
labels to the right of the
waveform display
Presets values
Blue cursor bar shows
ECG beat labels
24-hour (or up to 96-hour) time
line indicates patient or
equipment state
Printouts
Waveforms
—
Factory default
Up to five (ten in the full-screen review view) monitored within the last 24 hours in
following order of priority:
1. ECG
2. P1
3. P2
4. P3
5. P4
6. CO
2
7. RESP
8. SpO
2
25 mm/s; period depends on sweep speed
The most recent seconds monitored appear at the right side of the window, or if
another review window was viewed first, the period is centered around the cursor bar
position in the first-viewed review window.
Reflect labels selected at the monitor during the current time position of the cursor
2
bar.
Propaq LT monitor lead selections are independent from Acuity System lead
selections.
ECG scale, 1 mV
Sweep speed 25 mm/s
P1 range 30 mmHg to 180 mmHg
P2 range 0 mmHg to 50 mmHg
P3 range 0 mmHg to 50 mmHg
P4 range 0 mmHg to 50 mmHg
CO range 0 mmHg to 60 mmHg
2
SpO scale 1x
2
RESP scale 2x
Event types. Event markers are arrhythmia types, Arrhythmia and ST Relearn or
Learning Done and snapshot print.
•
Normal ( ) and ventricular (
If Acuity System includes Arrhythmia Analysis option, beat labels appear for
waveforms displayed at sweep speeds between 6.25 mm/s and 50 mm/s
Time line color matches icon color at all points in time
Waveforms
Custom
All Leads
Chapter 11 Specifications
v
)
197